machinable 3003 6061 1 Bar chequered aluminium plate for Refrigeration Floor Truck
We can supply
Alloy: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 5086, 6061 6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
The 6061 aluminum plate is an alloy that has been made with silicon and magnesium. It is a readily machinable, weldable and formable grade of aluminum. It is the highest in its class of heat treated aluminums when it comes to corrosion resistance. This allows it to be used in heavy duty structures and marine environments. This product has a protective surface film that helps keep it from corroding. For further corrosion resistance, other coatings can be applied or anodizing can be performed. The electrical conductivity of this metal is 40 percent of copper. It is frequently used in the electrical field in the form of electrical fittings and connectors. Other applications for 6061 aluminum grades include marine fittings, marine components, fasteners, truck components, hinge pins, magneto parts, frames and structural components. It has a good weight-to-strength ratio, making it ideal for heavy duty structures.
The welding capability of this product is great, allowing any method of welding to be used. Annealing can be performed, which will put it in a state to be easily cold worked. Any methods of cold working can be used for stamping, drilling, bending, deep drawing, tapping and cutting. When annealing this metal, it's recommended that it be placed in 775 degrees F for between two and three hours, followed by a steady drop in the temperature by 50 degrees each hour, until it is down to 500 degrees F. Air cooling should be allowed afterward. Other methods of heat treatment that can be used include solution heat treating, aging precipitation heat treating and hot working
aluminum stair tread sheet, Aluminum tread Brite plate,Aluminum checker plate manufacturers, Perforated aluminum sheet china,Diamond sheet manufacturers, Aluminum tread plate manufacturers, Aluminium sheet factory, aluminium plate metal
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
Product Tags:
|
|
Machinable 3003 6061 Aluminium Chequered Plate Custom Size For Refrigeration Floor Images
|
